Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Origin: Mainland China
Model Number: Selfie Phone Holder
Charger: Wireless Charger
Features: Magnetic
Type: Magnetic Holder
Model: BBC-8
Color: Black, blue, pink, purple (optional)
Style: Basic, upgraded wireless charging (optional)
Material: ABS + magnet + PU
Battery capacity: 200mAh
Input interface: Type-C
Rated voltage: DC/5V
Rated current: 2A
Power: about 10W
Size: 11.2×8.3×3.5cm/4.41×3.27×1.38in
Weight: 60g
About the difference between the basic model and the upgrade model:
The two models have the same appearance, with magnets, control boards, Bluetooth-compatible and batteries.
The difference is that the basic model does not have wireless charging function, while the upgraded model has wireless charging function.
Product usage:
How to use: Read the instructions before receiving the product!!!
Press and hold the ON key for 2 seconds, and the blue indicator flashes. At this time, turn on the mobile phone Bluetooth-compatible to connect to the Bluetooth-compatible device named BBC-8;
After the connection is successful, the blue indicator is always on. At this time, the mobile phone holder can take photos and videos.
When not in use, press the ON key for 2 seconds. If the indicator light is off, it means the power is off!
It will automatically shut down when the battery is low. At this time, the product needs to be charged. The red indicator light is always on when charging, and the light is off when fully charge. The charging time is about 2.5 hours.
Q&A:
Q: Can I only use my for iPhone?
A: Both for Android and for Apple mobile phones with Bluetooth-compatible function can be used.
Q: How can other mobile phones be attracted without magnetic suction function on the back?
A: An iron ring with adhesive backing is provided inside each product packaging box. When using, stick the iron ring on the back of the phone, and then attach the bracket.
Q: Can I use it with my phone case?
A: Not recommended, because the magnetism of the phone case will be greatly reduced after it is put on.
Users with mobile phone cases need to stick the iron ring on the mobile phone case, and then suck the bracket up.
It is also not allowed to put the iron ring inside the phone case for use. The iron ring needs to contact with the bracket to give full play to its magnetism!
Be careful:
Wireless charging is not a power bank. The wireless charging power is 10W. It needs to be connected to a USB charging cable. The interface is Type-C. The battery is a 200mAh polymer battery. The battery only supplies power to Bluetooth-compatible. Normally, it can last for two to three months when you go out to play and take photos
There is an iron ring inside the packaging box. At present, for Apple 12/13/14 series models have magnetic properties on the back, so the iron ring can not be directly adsorbed. For other models, the iron ring needs to be glued on the back of the phone (press it tightly after being glued), and then it can be used after being sucked on
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
المراجعات
لا توجد مراجعات بعد.